漆膜硬度检测标准

原创来源：北检院发布时间：2023-02-14 10:23:05 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

漆膜硬度检测标准相关信息

GB/T 6739-2022 色漆和清漆铅笔法测定漆膜硬度
简介：
信息：ICS：87.040 CCS：G50 发布：2022-12-30 实施：2023-07-01

GB/T 6739-2006 色漆和清漆.铅笔法测定漆膜硬度
简介：1.1 本标准是有关色漆、清漆及相关产品的取样和试验的系列标准之一。本标准规定了一种通过在漆膜上推压已知硬度标号的铅笔来测定漆膜硬度的方法。本试验可以在色漆、清漆及相关产品的单涂层上进行,也可以在多涂层体系的最上层进行。1.2 这种快速、经济的试验方法用于比较不同涂层的铅笔硬度是有效的。本方法对于铅笔硬度有明显差异的一系列已涂漆试板提供相对等级评定则更为有效。本方法仅适用于光滑表面。
信息：ICS：87.040 CCS：G50 发布：2006-12-29 实施：2007-06-01

GB/T 1730-1993 漆膜硬度测定法摆杆阻尼试验
简介： 本标准规定了在色漆、清漆及有关产品的单层或多层涂层上进行摆杆阻尼试验，测定其阻尼时间的标准方法。本标准规定A和B两种方法，A法采用科尼格（Konig）和珀萨兹（Persoz）两种摆杆式阻尼试验仪，B法采用双摆杆式阻尼试验仪。
信息：ICS：87.010 CCS：G50 发布：1993-03-20 实施：1993-12-01

GOST R 54586-2011 涂装材料.铅笔试验测定漆膜硬度方法
简介：
信息：ICS：87.040 CCS：发布：2011-01-01 实施：2012-09-01

TIS 2270-2006 色漆和清漆.铅笔法测定漆膜硬度
简介：
信息：ICS：87.040 CCS：发布：2006-03-24 实施：

ASTM D3363-2005(2011)e2 铅笔实验测定漆膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

ASTM D3363-2005(2011)e1 铅笔试验测定漆膜硬度的标准试验方法
简介：Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller.1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2005 实施：

ASTM D3363-2005(2011)e2 铅笔实验测定漆膜硬度的标准试验方法
简介： Pencil hardness measurements have been used by the coatings industry for many years to determine the hardness of clear and pigmented organic coating films. This test method has also been used to determine the cure of these coatings, especially when forced dried using heat. This test method is especially useful in developmental work and in production control testing in a single laboratory. It should be recognized that the results obtained may vary between different laboratories when different pencils as well as panels are used. Every effort should be made to standardize the hardness of the lead used and the technique followed. If this test method is used as a basis for purchase agreement, maximum precision will be achieved if a given set of referee pencils be agreed upon between the purchaser and the seller. 1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This test method is similar in content (but not technically equivalent) to ISO 15184. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 CCS：G50 发布：2005 实施：

FORD FLTM BI 151-01-2001 漆膜的铅笔硬度;替代FLTM EU-BI 051-01［替代:FORD FLTM EU-BI 051-01］
简介：
信息：ICS： CCS：发布：2001-03-20 实施：

FORD FLTM BI 112-01-2001 漆膜用斯瓦德（Sward）硬度试验;替代FLTM BI 012-01,FLTM EU-BI 012-01［替代:FORD FLTM BI 012-01,FORD FLTM EU-BI 012-01］
简介：
信息：ICS： CCS：发布：2001-03-14 实施：

ASTM D3363-2000 铅笔试验测定漆膜硬度的标准试验方法
简介：1.1 This test method covers a procedure for rapid, inexpensive determination of the film hardness of an organic coating on a substrate in terms of drawing leads or pencil leads of known hardness. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：2000 实施：