干燥时间检测标准

原创来源：北检院发布时间：2023-02-14 18:32:38 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

干燥时间检测标准相关信息

GB/T 1728-2020 漆膜、腻子膜干燥时间测定法
简介：
信息：ICS：87.040 CCS：G50 发布：2020-11-19 00:00:00.0 实施：2021-10-01 00:00:00.0

DIN 53131-2-2005 纸的试验.喷墨介质.第2部分:干燥时间
简介：
信息：ICS：85.080.10 CCS：Y30 发布：2005-11-01 实施：

NF L16-115-1991 航空航天系列.涂料和清漆."芯硬化"干燥时间的测定
简介：
信息：ICS：49.040;87.040 CCS：V10;G51 发布：1991-12-01 实施：1991-12-05

GB/T 37362.1-2019 色漆和清漆干燥试验第1部分：完全干燥状态和完全干燥时间的测定
简介：
信息：ICS：87.040 CCS：G50 发布：2019-03-25 00:00:00.0 实施：2020-02-01 00:00:00.0

ASTM F2498-05 用污迹法测定喷墨介质和墨水干燥时间的标准实施规程
简介：
信息：ICS：37.100.20 CCS：发布：2005-06-01 实施：

NF L16-116-1991 航空航天系列.涂料和清漆."针硬化"干燥时间的测定
简介：
信息：ICS：49.040;87.040 CCS：V10;G51 发布：1991-12-01 实施：1991-12-05

GB/T 1728-1979 漆膜,腻子膜干燥时间测定法
简介： 本标准适用于漆膜、腻子膜干燥时间的测定。在规定的干燥条件下，表层成膜的时间为表干时间；全部形成固体涂膜的时间为实际干燥时间。以小时或分表示。
信息：ICS：87.010 CCS：G50 发布：1979-09-15 实施：1980-01-01

ASTM F2498-2005(2011) 运用污迹法测定喷墨介质和墨水干燥时间的标准操作规程
简介：In addition to providing acceptable image quality, ink jet media have to dry in a reasonable time period so that the image is not perturbed by handling after imaging. Good drying time is a prime consideration for inkjet inks and media. An inkjet print which does not dry in a reasonable time period has limited usefulness. This practice is used to obtain comparative data of drying times for inkjet inks and media.1.1 This practice describes a procedure for assessing the drying time of black and white or color images produced by inkjet printers by smudging yellow, magenta cyan, red, green, blue, and black printed color bars. 1.2 This practice can be used to test different media with a given set of inks or it can be used to evaluate different inks with a given media. 1.3 This method is applicable to printed images, where the image may be contacted after printing. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：37.100.20 (Materials for graphic technology) CCS：发布：2005 实施：

ISO 9117-1990 色漆和清漆贯穿干燥状态和贯穿干燥时间试验方法
简介：This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint or related material has, after a specified drying period, reached the through-dry state, i.e. a pass/fail test. The test pro-cedure may also be used to determine the time taken to achieve that state.
信息：ICS：87.040 CCS：G50 发布：1990-04 实施：1990-04-01

KS M ISO 9117-1-2022 色漆和清漆.干燥试验.第1部分:透干状态和透干时间的测定
简介：
信息：ICS：87.040 CCS：发布：2022-11-09 实施：

ASTM F2498-2005 用烟熏法测定喷墨介质和墨水的干燥时间的标准实施规程
简介：1.1 This practice describes a procedure for assessing the drying time of black and white or color images produced by inkjet printers by smudging yellow, magenta cyan, red, green, blue, and black printed color bars.1.2 This practice can be used to test different media with a given set of inks or it can be used to evaluate different inks with a given media.1.3 This method is applicable to printed images, where the image may be contacted after printing.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：37.100.20 (Materials for graphic technology) CCS：A17 发布：2005 实施：

UNE 104-281 Pt.5-13-1989 沥青和改性沥青材料．涂料和胶粘剂．试验方法．干燥时间
简介：Esta norma tiene por objeto determinar el tiempo de secado, en sus diferentes fases, de pinturas y barnices empleados como materiales impermeabilizantes en la edificación.
信息：ICS： CCS：发布：1989-5-1 实施：

ASTM D5909-20 用角鲨烯抗性测定氧化干燥印刷油墨干燥时间的标准试验方法
简介：
信息：ICS：87.080 CCS：发布：2020-06-01 实施：

ASTM D5895-01e1 用机械记录器测量有机涂层成膜过程中干燥或固化时间的标准试验方法
简介：
信息：ICS：25.220.60 CCS：发布：2001-02-10 实施：

SNI 06-0510-1989 有机保护涂层干燥时间测试方法
简介：
信息：ICS：87.020 CCS：发布：1989 实施：

KS K 9071-2019 纺织品.一次性非织造布试验方法.水分干燥时间的测定
简介：
信息：ICS：59.080.30 CCS：发布：2019-10-07 实施：

ASTM D5895-01 用机械记录器测量有机涂层成膜过程中干燥或固化时间的标准试验方法
简介：
信息：ICS： CCS：发布：2001-02-10 实施：

CSN 50 0440-1987 纸张上墨水干燥时间的测定
简介：Spracovatel: V?skumn? ústav papiera a celulózy, Bratislava — Ing. Erich Novák, CSc.Odborové normaliza?ně st?edisko: Slovcepa, V?PC, Bratislava — Ing. Eva SlavkovskáPracovník ??adu p?e normalizáciu a meranie: Ing. Eva ?eháková.
信息：ICS： CCS：发布：1987-5-11 实施：

KS M ISO 9117-1-2017 色漆和清漆干燥试验第1部分:干透状态和干透时间的测定
简介：
信息：ICS：87.040 CCS：发布：2017-12-27 实施：

ASTM D5895-96 用机械记录器测量有机涂层成膜过程中干燥或固化时间的标准试验方法
简介：
信息：ICS：25.220.60 CCS：发布：2001-02-10 实施：

NBN T 22-119-1984 油漆．干燥时间的常规测定
简介：
信息：ICS： CCS：发布：1984-1-5 实施：

ASTM C1792-14 用于饱和混凝土的一维干燥的质量损失与时间的测量的标准测试方法
简介：
信息：ICS：91.100.30 CCS：发布：2014-07-01 实施：

ASTM D5909-96a 用角鲨烯抗性测定氧化干燥印刷油墨干燥时间的标准试验方法
简介：
信息：ICS： CCS：发布：2001-01-01 实施：

SFS 3631-1976 油漆和清漆．干燥时间测定
简介：
信息：ICS： CCS：发布：1976-12-31 实施：

ASTM C1792-2014 用于测量饱和混凝土一维干燥的质量损失与时间的标准试验方法
简介： 5.1x00a0;Drying behavior is related to the mass transport properties of concrete, such as liquid permeability and water diffusivity. It depends on a number of factors such as concrete mixture proportions, presence of admixtures and supplementary cementitious materials, composition and physical characteristics of the aggregates and cementitious materials, curing conditions, degree of hydration, and presence of microcracking. Drying behavior is also affected strongly by the degree of saturation and temperature of the concrete at the start of drying as well as the environmental conditions that exist during drying such as temperature, relative humidity, and air flow rate (wind speed). 5.2x00a0;This test method subjects initially saturated specimens of concrete to one-dimensional drying under controlled environmental conditions. The resulting mass loss versus time data can be used to estimate transport coefficients including liquid permeability3 and water diffusivity.4 These coefficients may be used in numerical models to estimate service life of concrete and reinforced concrete members exposed to different environmental conditions.5,6 5.3x00a0;The test method provides instruction and a sequence of steps for measuring mass loss versus time. The preferred rate of this mass loss will depend on the application. For example, for interior commercial flooring applications, a mass loss that occurs quickly may be preferable, while for outdoor exposures in an aggressive environment, slower mass loss may be beneficial. 1.1x00a0;This test method determines the mass loss over time due to one-dimensional drying and moisture transport in an initially saturated cylindrical specimen with both ends exposed to constant temperature and relative humidity. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：91.100.30 (Concrete and concrete products) CCS：Q13 发布：2014 实施：

SN/T 0801.13-1999 进出口动植物油脂.干燥时间检验方法
简介：
信息：ICS： CCS：X14 发布：1999-12-01 实施：2000-05-01

BS 684-1.7-1976 脂肪和油脂的分析方法.物理法.表面干燥时间的测定
简介：This Section describes a method for determining the surface-drying characteristics of a film of oil and is similar to that described in BS 3900 : Part C2.The method may be carried out either as a 'go/no go' test by determining the surface-drying state after a specified time to assess compliance with a particular requirement, or by determining the surface-drying state at suitable intervals until the surface-drying time is obtained.
信息：ICS：67.200.10 CCS：X14 发布：1976-10-29 实施：1976-10-29

KS M ISO 9117-1-2012 涂料和清漆.干燥试验.第1部分:干燥状态和干燥时间测定
简介：이 표준은 표준 조건에서 도료, 바니시 및 관련 제품의 단일 도장이나 다중 도장 시스템이
信息：ICS：87.040 CCS：G51 发布：2012-08-20 实施：2012-08-20

ASTM D5909-96a(2001) 用角鲨烯抗性测定氧化干燥印刷油墨干燥时间的标准试验方法
简介：
信息：ICS：87.080 CCS：发布：1996-08-10 实施：

BS 684 Sec.1.7-1976 脂肪和脂肪油的分析方法.第1部分:物理方法.第7节:表面干燥时间的测定
简介：
信息：ICS： CCS：X14 发布：1976-10-29 实施：

CGSB 1-GP-71 NO. 5-96-1996 对涂料和相关涂层进行涂料和颜料干燥时间试验的方法代替1-GP-71,方法5.1,5.10 和 5.14
简介：Appliquer (méthode 98.1) le produit sur support prescrit et faire sécher à l’air ambiant dans des conditions normales(méthode 103.1) ou faire sécher au four (méthode 103.2) pendant la période prescrite. Conditionner les feuils chauffés pendant24
信息：ICS： CCS：G53 发布：1996-05-01 实施：

STAS 2875-1975 油漆和清漆．膜干燥时间测定
简介：
信息：ICS： CCS：发布：1975-2-1 实施：

DIN 53131-2-2010 纸的试验.喷墨介质.第2部分:干燥时间
简介：
信息：ICS：85.080.10 CCS：Y30 发布：2010-09 实施：

CGSB 1-GP-71 NO. 38-96-1996 对涂料与相关涂层进行涂料和颜料干燥时间试验的方法代替(F)1-GP-71,方法5.1,5.10 和 5.14
简介：Sauf indication contraire, préparer des plaques en acier de la manière décrite à la Méthode 100.2. Appliquer sur lesplaques le produit à l’essai conformément à la méthode prescrite. Appliquer aussi sur le dos et les bords de la plaque le produità l’es
信息：ICS： CCS：G53 发布：1996-05-01 实施：

STAS 7279-1975 印刷用墨．干燥时间测定
简介：1.1. Prezentul standard se refer? la metodele de determinare a timpului de uscare a cernelurilor poligrafice pe baz? de lian?i uleio?i.1.2. Metodele ?nscrise ?n prezentul standard nu se aplic? la cernelurile cu uscare prin evaporare ?i nici
信息：ICS： CCS：发布：1975-08-01 实施：

BS EN ISO 9117-1-2009 涂料和清漆.干燥试验.贯穿干燥状态和贯穿干燥时间的测定
简介：This part of ISO 9117 specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint, varnish or related material has reached the through-dry state after a specified drying period.NOTE The test procedure may also be used to determine the time taken to achieve that state.
信息：ICS：87.040 CCS：G51 发布：2009-11-30 实施：2009-11-30

ASTM D5909-1996a(2001) 用角鲨烯抗性测试氧化物干燥印刷油墨干燥时间的标准试验方法
简介：1.1 This test method covers the procedure for determining the drying time of oxidative-drying printing inks (also referred to as "sheetfed inks") by squalene resistance of printed ink films. 1.2 This test method is applicable to all paste inks that dry primarily by oxidation regardless of the substrate on which they are printed. With appropriate changes in the test fluid, it may also be used with paste inks that dry by other mechanisms, such as heatset or ultraviolet light. 1.3 This test method utilizes a modified rub tester and is intended to serve as a "referee" procedure when laboratories, using less rigorous test procedures (see Appendix X1), cannot agree on their results. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.080 (Inks. Printing inks) CCS：E34 发布：1996 实施：

CSN 67 3150 Cast.04-1975 干燥时间
简介：
信息：ICS： CCS：发布：1975-04-09 实施：

DIN EN ISO 9117-1-2009 油漆和清漆.干燥试验.第1部分:通干状态和通干时间的测定(ISO 9117-1:2009),德语版 EN ISO 9117-1:2009
简介：This part of ISO 9117 specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint, varnish or related material has reached the through-dry state after a specified drying period.NOTE The test procedure may also be used to determine the time taken to achieve that state.
信息：ICS： CCS：G51 发布：2009-10 实施：

ASTM D5909-1996a(2011) 耐低凝点高级润滑油浸透的氧化物干燥印刷油墨干燥时间的标准试验方法
简介：Inadequate setting or drying of sheetfed inks, or both, can cause blocking of stacked prints with subsequent loss of product. x201C;Settingx201D; of an ink refers to the rapid rise in viscosity of the printed ink film, sometimes accompanied by surface drying, that prevents transference of the undried ink film to adjacent surfaces under light pressure. x201C;Settingx201D; is a property of the ink-substrate combination. Inadequate drying may be due to several factors, but the primary causes are: (1) omission of metallic driers from the ink, improper ink formulation (2) unusual ink-substrate interactions, and (3) use of a fountain solution that is too acidic. If the test prints are made on a standard laboratory proof press, where there is no application of fountain solution, then only the first three possible causes can be evaluated. If the prints have been made on a commercial production printing press or some other acceptable means of introducing the fountain solution into the ink agreed upon, then the effect of fountain solution can be determined. It will often be necessary to run several tests to isolate the specific cause of a drying problem. This test method is suitable for most combinations of oxidative drying inks and substrates. Because this test method relies on a visual assessment of the extent of drying, very light colors and clear varnishes may present difficulties in quantifying the extent of drying. In such cases, the supplier and the customer should agree upon an alternative method of assessing the drying properties of the ink.1.1 This test method covers the procedure for determining the drying time of oxidative-drying printing inks (also referred to as x201C;sheetfed inksx201D;) by squalene resistance of printed ink films. 1.2 This test method is applicable to all paste inks that dry primarily by oxidation regardless of the substrate on which they are printed. With appropriate changes in the test fluid, it may also be used with paste inks that dry by other mechanisms, such as heatset or ultraviolet light. 1.3 This test method utilizes a modified rub tester and is intended to serve as a x201C;refereex201D; procedure when laboratories, using less rigorous test procedures (see Appendix X1), cannot agree on their results. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.080 (Inks. Printing inks) CCS：A17;E34 发布：1996 实施：

SIS 18 41 53-1975 油漆．干燥时间的测定
简介：
信息：ICS： CCS：发布：1975-01-01 实施：

NF T30-087-1-2009 油漆和清漆.干燥试验.第1部分:干透状态和干透时间
简介：
信息：ICS：87.040 CCS：G51 发布：2009-07-01 实施：2009-07-17

ASTM D5909-1996a(2006) 用角鲨烯抗性测试氧化物干燥印刷油墨干燥时间的标准试验方法
简介：Inadequate setting or drying of sheetfed inks, or both, can cause blocking of stacked prints with subsequent loss of product. x201C; Settingx201D; of an ink refers to the rapid rise in viscosity of the printed ink film, sometimes accompanied by surface drying, that prevents transference of the undried ink film to adjacent surfaces under light pressure. x201C; Settingx201D; is a property of the ink-substrate combination. Inadequate drying may be due to several factors, but the primary causes are: (1) omission of metallic driers from the ink, improper ink formulation (2) unusual ink-substrate interactions, and (3) use of a fountain solution that is too acidic. If the test prints are made on a standard laboratory proof press, where there is no application of fountain solution, then only the first three possible causes can be evaluated. If the prints have been made on a commercial production printing press or some other acceptable means of introducing the fountain solution into the ink agreed upon, then the effect of fountain solution can be determined. It will often be necessary to run several tests to isolate the specific cause of a drying problem. This test method is suitable for most combinations of oxidative drying inks and substrates. Because this test method relies on a visual assessment of the extent of drying, very light colors and clear varnishes may present difficulties in quantifying the extent of drying. In such cases, the supplier and the customer should agree upon an alternative method of assessing the drying properties of the ink.1.1 This test method covers the procedure for determining the drying time of oxidative-drying printing inks (also referred to as "sheetfed inks") by squalene resistance of printed ink films.1.2 This test method is applicable to all paste inks that dry primarily by oxidation regardless of the substrate on which they are printed. With appropriate changes in the test fluid, it may also be used with paste inks that dry by other mechanisms, such as heatset or ultraviolet light.1.3 This test method utilizes a modified rub tester and is intended to serve as a "referee" procedure when laboratories, using less rigorous test procedures (see Appendix X1), cannot agree on their results.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.080 (Inks. Printing inks) CCS：A17 发布：1996 实施：

COVENIN 690-1974 委内瑞拉稀释颜料标准中关于干燥时间的测量
简介：Esta norma contempla el método para determinar los -tiempos de secamiento al tacto y para repintar de -las pinturas diluibles con agua, a temperatura ambien te.
信息：ICS： CCS：发布：1973-10-16 实施：

EN ISO 9117-1-2009 油漆和清漆.干燥试验.第1部分:通干状态和通干时间的测定
简介：This part of ISO 9117 specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint, varnish or related material has reached the through-dry state after a specified drying period.
信息：ICS：87.040 CCS：发布：2009-05-01 实施：

CGSB 25.1 NO. 10.1-95-CAN/CGSB CORR 1-1995 蜡和上光剂上光和干燥时间的取样和测试方法
简介：
信息：ICS： CCS：发布：1995-08-01 实施：

GOST 6591-1973 印刷油漆.干燥或结膜时间的测定法
简介：Настоящий стандарт распространяется на краски высокой и офсетной печати и устанавливает метод определения времени высыхания или пленкоо
信息：ICS：87.080 CCS：发布：1973 实施：1975-01-01

ISO 9117-1-2009 油漆和清漆.干燥试验.第1部分:穿透干燥状态和穿透干燥时间
简介：
信息：ICS：87.040 CCS：G51 发布：2009-05 实施：

CGSB 25.1 NO. 10.1-95-CAN/CGSB-1995 蜡与抛光剂的取样与试验方法.光泽与干燥时间代替25-GP-1M 方法10.1: 1995年8月
简介：Methods of Sampling and Testing Waxes and Polishes Gloss and Drying Time
信息：ICS： CCS：E42 发布：1995-05-01 实施：

ISO 9117-1:2009 色漆和清漆——干燥试验第1部分:干燥状态和干燥时间的测定
简介：
信息：ICS：87.040 CCS：发布：2009-04-28 实施：

NBN-EN 29117-1993 油漆和清漆．中心干燥测定和干燥时间测定：测验方法（ISO 9117-1990）
简介：
信息：ICS： CCS：发布：1993-8-6 实施：

GOST 19007-1973 油漆材料.干燥时间和干燥程序测定测定法
简介：Настоящий стандарт распространяется на лакокрасочные материалы и устанавливает метод определения времени и степень высыхания лакокрасо
信息：ICS：87.040 CCS：发布：1973 实施：1974-07-01

TCVN 2096-1993 色漆.干燥状态和干燥时间的测定方法
简介：
信息：ICS： CCS：发布：2008 实施：

SIS SS-EN 29 117-1992 颜料和涂料．干燥状态和通过干燥时间的测定．测试方法
简介：This International Standard is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a test method for determining under standard conditions whether a single coat or a multi-coat system of paint or related material nas, after a specified drying period, reached the through-dry state, i.e. a pass/fail test. The test pro-cedure may also be used to determine the time taken to achieve that state.
信息：ICS： CCS：发布：1992-9-30 实施：

MSZ 4803/13.lap-1965 电车电介质．干燥（燃烧）时间检测薄层
简介：
信息：ICS： CCS：发布：1965 实施：

ASTM D5909-96a(2006) 用角鲨烯抗性测定氧化干燥印刷油墨干燥时间的标准试验方法
简介：
信息：ICS：87.080 CCS：发布：2006-11-01 实施：

NEN-ISO 9117-1992 ISO 9117-1990 色漆和清漆．完全干燥状态和完全干燥时间测定．试验方法
简介：
信息：ICS： CCS：发布：1992-10 实施：

MSZ 9650/19.lap-1965 涂料检测．干燥时间和干燥过程检测
简介：
信息：ICS： CCS：发布：1965 实施：