原创来源:北检院 发布时间:2023-02-15 02:31:03 点击数:
全国服务领域:河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门
GB/T 30789.5-2015 色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第5部分:剥落等级的评定
简介:GB/T 30789的本部分给出了通过与标准的图示比较,并使用ISO 4628-1中规定的定义,来评定剥落等级的方法。ISO 4628-1定义了关于涂层老化引起的缺陷的数量和大小以及外观均匀变化程度评定体系,并概述了评定体系的总则。本评价体系适用于老化和风化所引起的缺陷,以及诸如颜色变化(例如:黄变)的均匀变化。
信息:ICS:87.040 CCS:G50 发布:2015-07-03 实施:2016-02-01
DIN EN ISO 4628-5-2016 色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定(ISO 4628-5-2016).德文版本EN ISO 4628-5-2016
简介:
信息:ICS:87.040 CCS:G50 发布:2016-07 实施:
BS EN ISO 4628-5-2016 涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.剥落等级的评定
简介:
信息:ICS:87.040 CCS:G50 发布:2016-02-29 实施:2016-02-29
BS EN ISO 4628-5-2016 涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.剥落等级的评定
简介:
信息:ICS:87.040 CCS:G50 发布:2016-02-29 实施:2016-02-29
KS M ISO 4628-5-2012 涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第5部分:剥落等级的评定
简介:이 표준은 KS M ISO 4628-1에 정의된 표시 체계를 사용하여, 표준 그림과 비교에
信息:ICS:87.040 CCS:G51 发布:2012-12-21 实施:2012-12-21
KS M ISO 4628-5-2012 涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第5部分:剥落等级的评定
简介:이 표준은 KS M ISO 4628-1에 정의된 표시 체계를 사용하여, 표준 그림과 비교에
信息:ICS:87.040 CCS:G51 发布:2012-12-21 实施:2012-12-21
NF T30-140-5-2004 色漆和清漆.漆膜降解的评价.缺陷量值、大小以及外观均匀变化程度的规定.第5部分:剥落等级的评定
简介:
信息:ICS:87.040 CCS:G50 发布:2004-05-01 实施:2004-05-05
DIN EN ISO 4628-5-2004 色漆和清漆.漆膜降解的评定.缺陷量值、大小以及外观均匀改变程度的规定.第5部分:剥落等级的评定
简介:This part of ISO 4628 specifies a method for assessing the degree of flaking of coatings by comparison with pictorial standards and using the designation system defined in ISO 4628-1.
信息:ICS:87.040 CCS:G50 发布:2004-01 实施:
BS EN ISO 4628-5-2003 涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.剥落等级的评定
简介:This part of ISO 4628 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1. ISO 4628-1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
信息:ICS:87.040 CCS:G50 发布:2003-09-23 实施:2003-09-23
EN ISO 4628-5-2003 色漆和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.第5部分:剥落等级的评定 ISO 4628-5-2003
简介:
信息:ICS:87.040 CCS: 发布:2003-09-23 实施:
ISO 4628-5-2003 色漆和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第5部分:剥落等级的评定
简介:This part of ISO 4628 describes a method for assessing the degree of flaking of coatings by comparison with pictorial standards, using the designation system defined in ISO 4628-1.ISO 4628-1 defines the system used for designating the quantity and size of defects and the intensity of changes in appearance of coatings and outlines the general principles of the system. This system is intended to be used, in particular, for defects caused by ageing and weathering, and for uniform changes such as colour changes, for example yellowing.
信息:ICS:87.040 CCS:G50 发布:2003-09 实施:
ISO 4628-5-1982 色漆和清漆 漆膜降解的评定 一般性缺陷程度、量值和大小的规定 第5部分:剥落等级的规定
简介:
信息:ICS:87.040 CCS:G50 发布:1982-05 实施:
1、确认客户委托,寄样。
2、到样之后,确定具体的试验项目以及试验方案。
3、实验室报价。
4、签订保密协议,进行试验。
5、完成试验,确定检测报告
6、后期技术服务
友情提示:暂不接受个人委托测试
以上是关于"剥落等级检测标准"的介绍,如有其他问题可以咨询工程师为您服务!
服务项目
SERVICE PROJECT