韦氏硬度检测标准

韦氏硬度检测标准相关信息

GB/T 32660.3-2016 金属材料 韦氏硬度试验 第3部分:标准硬度块的标定
简介：
信息：ICS： CCS： 发布： 实施：2017-01-01

GB/T 32660.1-2016 金属材料 韦氏硬度试验 第1部分:试验方法
简介：
信息：ICS： CCS： 发布： 实施：2017-03-01

GB/T 32660.2-2016 金属材料 韦氏硬度试验 第2部分:硬度计的检验与校准
简介：
信息：ICS： CCS： 发布： 实施：2017-01-01

ASTM B647-2010(2016) 用韦氏硬度计测量铝合金的压痕硬度的标准试验方法
简介： 4.1x00a0;The Webster hardness gage is portable and therefore useful for in situ determination of the hardness of fabricated parts and individual test specimens for production control purposes. It is not as sensitive as Rockwell or Brinell hardness machines; see 10.2. 4.2x00a0;This test method should be used only as cited in applicable material specifications. 1.1x00a0;This test method covers the determination of indentation hardness of aluminum alloys with a Webster hardness gage, Model B. 1.2x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1x00a0;Exceptionx2014;The values given in parentheses are for information only. Note 1:x00a0;Two other models, A and B-75, are in use, but are not covered in this test method. Model A does not provide numerical values of hardness and Model B-75 covers only a part of the range of interest for aluminum alloys. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.120.10 CCS： 发布：2010 实施：

YS/T 471-2004 铜及铜合金韦氏硬度试验方法
简介：本标准规定了用钳式手提韦氏硬度计测量铜及铜合金硬度的方法。本标准适用于铜及铀合金材料的硬度测量，测量值范围相当于洛氏硬度 30-96HRF 和53-92HRF。
信息：ICS：77.150.30 CCS：H62 发布：2004-06-17 实施：2004-11-01

YS/T 420-2000 铝合金韦氏硬度试验方法
简介：
信息：ICS： CCS：H61 发布：2000-03-29 实施：2000-10-01

ASTM B647-1984(2000) 使用韦氏(Webster)硬度计测定铝合金的压痕硬度的标准试验方法
简介：1.1 This test method covers the determination of indentation hardness of aluminum alloys with a Webster hardness gage, Model B.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Note 1--Two other models, A and B-75, are in use, but are not covered in this test method. Model A does not provide numerical values of hardness and Model B-75 covers only a part of the range of interest for aluminum alloys.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：77.120.10 (Aluminium and aluminium alloys) CCS： 发布：1984 实施：

COVENIN 616-1975 委内瑞拉亚铁材料标准中关于亚铁材料韦氏硬度值的测试方法
简介：Esta norma contempla el ensayo para determinar la dureza super ficial de todos los materiales ferrosos según el método Vickers.
信息：ICS： CCS： 发布：1974-7-3 实施：