漆膜厚度检测标准

原创来源：北检院发布时间：2023-02-22 17:00:08 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

漆膜厚度检测标准相关信息

GB/T 37361-2019 漆膜厚度的测定超声波测厚仪法
简介：
信息：ICS：87.040 CCS：G50 发布：2019-03-25 00:00:00.0 实施：2020-02-01 00:00:00.0

FORD FLTM BI 117-01-2001 漆膜的厚度测量;替代FLTM BI 017-01,FLTM EU-BI 017-01
简介：
信息：ICS： CCS：发布：2001-03-19 实施：

GB/T 37361-2019 漆膜厚度的测定超声波测厚仪法
简介：
信息：ICS：87.040 CCS：G50 发布：2019-03-25 00:00:00.0 实施：2020-02-01 00:00:00.0

BS EN ISO 2808-2001 涂料和清漆.漆膜厚度的测定
简介：Ten methods for determination of film thickness using destructive and non-destructive tests. Includes methods for dry and wet films.
信息：ICS：87.040 CCS：G51 发布：1997-12-15 实施：1997-12-15

GB/T 4893.5-2013 家具表面漆膜理化性能试验第5部分:厚度测定法
简介：GB/T 4893的本部分规定了家具中木制件表面漆膜厚度的试验方法。本部分适用于测定家具中木制件表面漆膜的厚度。
信息：ICS：97.140 CCS：Y80 发布：2013-10-10 实施：2014-05-01

ISO 2808:1997 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：发布：1997-09-18 实施：

GB/T 13452.2-2008 色漆和清漆.漆膜厚度的测定
简介：本部分规定了一系列用于测量涂敷至底材上的涂层的厚度的方法,包括测量湿膜厚度、干膜厚度、未固化粉末涂层厚度及粗糙表面上漆膜厚度的方法。在有单个测试方法标准存在时,本部分直接引用这些标准,否则就把这些测试方法详细描述出来。附录A给出了测试方法概述,对每个测试方法规定了适用范围、现有标准和精密度。本部分也对与漆膜厚度测量有关的术语作了定义。
信息：ICS：87.040 CCS：G50 发布：2008-05-14 实施：2008-10-01

SANS 2808-1997 色漆和清漆．漆膜厚度的测定
简介：This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings applied to a substrate. It does not apply to metallic coatings. Some of the techniques described can be adapted for the measurement of the thickness of detached coatings. The principles of the methods, their particular field of application and the expected precision are given in table 1.This International Standard also defines terms concerning the determination of film thickness.
信息：ICS： CCS：发布：1997-09-15 实施：

GB/T 13452.2-1992 色漆和清漆漆膜厚度的测定
简介： 本标准规定了色漆和有关材料漆膜厚度的测量方法。它不包括所有的通用方法，而仅规定在一定条件下测定漆膜厚度的方法。
信息：ICS：87.040 CCS：G50 发布：1992-04-28 实施：1993-03-01

ISO 2808-1997 色漆和清漆漆膜厚度的测定
简介：This International Standard reviews and specifies a number of methods that are applicable to the measurement of the thickness of organic coatings applied to a substrate. It does not apply to metallic coatings. Some of the techniques described can be adapted for the measurement of the thickness of detached coatings. The principles of the methods, their particular field of application and the expected precision are given in table 1.This International Standard also defines terms concerning the determination of film thickness.
信息：ICS：87.040 CCS：G50 发布：1997-09 实施：

GB/T 4893.5-1985 家具表面漆膜厚度测定法
简介： 本标准适用于测定木家具及其他家具木制件表面漆膜的厚度。
信息：ICS：97.140 CCS：Y80 发布：1985-02-01 实施：1985-04-01

ASTM D823-1995(2012)e1 油漆、清漆及有关产品制成厚度均匀漆膜试片的标准实施规程
简介：4. Significance and UseTop Bottom 4.1 These practices should be used for those coatings that are designed for spray applications of objects in the factory or in the field. It is particularly important that it be used in the evaluation of metallic coatings for appearance properties, such as gloss and color. 4.2 Coatings applied by this test method may exhibit a slight orange-peel or spray wave. 1.1 Five practices are given for preparing films of uniform thickness of coatings on test panels. These practices are: Practice A???Automatic Spray Machine Application Practice B???Motor-Driven Dip Coater Application Practice C???Motor-Driven Blade Film Application Practice D???Hand-Held Spray Gun Application Practice E???Hand-Held Blade Film Application 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：1995 实施：

GB 1764-1979 漆膜厚度测定法
简介：
信息：ICS： CCS：发布：1979-09-15 实施：1980-01-01

ASTM D823-1995(2007) 色漆,清漆,喷漆及有关产品制成厚度均匀漆膜试片的标准实施规程
简介：These practices should be used for those coatings that are designed for spray applications of objects in the factory or in the field. It is particularly important that it be used in the evaluation of metallic coatings for appearance properties, such as gloss and color. Coatings applied by this test method may exhibit a slight orange-peel or spray wave.1.1 Five practices are given for preparing films of uniform thickness of coatings on test panels. These practices are: Practice A-Automatic Spray Machine Application Practice B-Motor-Driven Dip Coater Application Practice C-Motor-Driven Blade Film Application Practice D-Hand-Held Spray Gun Application Practice E-Hand-Held Blade Film Application1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G51 发布：1995 实施：

GB/T 1764-1979 漆膜厚度测定法
简介： 本标准适用于漆膜厚度的测定，采用杠杆千分尺或磁性测厚仪测定，以微米表示。
信息：ICS：87.010 CCS：G50 发布：1979-09-15 实施：1980-01-01

ASTM D823-1995(2012) 油漆、清漆及有关产品制成厚度均匀漆膜试片的标准实施规程
简介：4. Significance and UseTop Bottom 4.1 These practices should be used for those coatings that are designed for spray applications of objects in the factory or in the field. It is particularly important that it be used in the evaluation of metallic coatings for appearance properties, such as gloss and color. 4.2 Coatings applied by this test method may exhibit a slight orange-peel or spray wave. 1.1 Five practices are given for preparing films of uniform thickness of coatings on test panels. These practices are: Practice A???Automatic Spray Machine Application Practice B???Motor-Driven Dip Coater Application Practice C???Motor-Driven Blade Film Application Practice D???Hand-Held Spray Gun Application Practice E???Hand-Held Blade Film Application 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：87.040 (Paints and varnishes) CCS：G50 发布：1995 实施：

KS M ISO 2808-2022 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：发布：2022-12-13 实施：

ISO 2808:1991 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：发布：1991-12-12 实施：

GMKOREA EDS-T-7970-2020 涂料漆膜厚度的试验方法（第4版；英语/韩语）
简介：
信息：ICS： CCS：G51 发布：2020-12-01 实施：

ISO 2808:1974 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：发布：1974-07-01 实施：

BS EN 13523-1-2017 镀金属线圈.测试要求.漆膜厚度
简介：
信息：ICS：17.040.20;25.220.60 CCS：A29 发布：2017-02-28 实施：2017-02-28

ISO 2808-1974 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：5905;5900 CCS：G50 发布：1974-07 实施：

BS EN 13523-1-2017 镀金属线圈.测试要求.漆膜厚度
简介：
信息：ICS：17.040.20;25.220.60 CCS：A29 发布：2017-02-28 实施：2017-02-28

GOST 938.9-1969 皮革.漆膜厚度测定法
简介：Настоящий стандарт распространяется на хромовую кожу для верха и подкладки обуви, а также на галантерейную кожу и устанавливает метод опр
信息：ICS：59.140.30 CCS：发布：1969 实施：1970-01-01

KS M ISO 2808-2012 涂料和清漆.漆膜厚度的测定
简介：이 표준은 소지에 도장한 도막의 두께 측정에 적용할 수 있는 다양한 방법에 대하여 설명한다
信息：ICS：87.040 CCS：G51 发布：2012-12-18 实施：2012-12-18

ISO 2808-2019 色漆和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：发布：0000-00-00 实施：0000-00-00

BS EN 13523-1-2009 镀金属线圈.测试要求.漆膜厚度
简介：This European Standard specifies the procedures for determining the dry film thickness of an organic coatingon a metallic substrate (coil coating).Four appropriate methods are given in this European Standard:a) magnetic induction;b) eddy current;c) micrometer;d) optical.The methods are applicable only to products with smooth and flat substrates but the coating itself may betextured. In that case, for methods a) and b) the average of a series of readings will represent an average ofthe thickness of the organic coating, while method c) will give the maximum thickness and method d) canprovide the minimum, maximum and average thickness.Non-destructive continuous-web methods on measurement of dry-film thickness (see EN ISO 2808) are notdealt with.
信息：ICS：17.040.20;25.220.60 CCS：A29 发布：2010-05-31 实施：2010-05-31

NF H34-056-2009 包装.柔性铝管.内漆膜厚度的测定方法
简介：
信息：ICS：55.120 CCS：A82 发布：2009-05-01 实施：2009-05-22

DIN EN ISO 2808-2007 涂料和清漆.漆膜厚度的测定
简介：This International Standard describes a number of methods that are applicable to the measuremen of thethickness of coatings applied to a substrate．Methods for determining wet-film thickness，dry-film thicknessand the film thickness of uncured powder layers are described．Reference is made to individual standardswhere these exist．Otherwise the method is described in devil．An overview on the methods is given in Annex A，in which the field of application，existing standards and theprecision are specified for the individual methods．This International Standard also defines terms concerning the determination of film thickness.
信息：ICS：17.040.20;87.040 CCS：G51 发布：2007-05 实施：

NF T30-120-2007 涂料和清漆.漆膜厚度的测定
简介：
信息：ICS：87.040 CCS：G51 发布：2007-04-01 实施：2007-04-20

ISO 2808-2007 涂料和清漆.漆膜厚度的测定
简介： 本部分规定了一系列用于测量涂敷至底材上的涂层的厚度的方法，包括测量湿膜厚度、干膜厚度、未固化粉末涂层厚度及粗糙表而上漆膜厚度的方法。在有单个测试方法标准存在时，本部分直接引用这些标准，否则就把这些测试方法详细描述出来。附录A给出了测试方法概述，对每个测试方法规定了适用范围、现有标准和精密度。本部分也对与漆膜厚度测量有关的术语作了定义。
信息：ICS：87.040 CCS：G50 发布：2007-02 实施：

FORD WSB-M64J28-C1-2003 底漆,水性阳离子电泳漆,20微米漆膜厚度,初次喷涂灰色,180摄氏度烘烤温度,(和FORD WSS-M99P1111-A一起使用)在文件WSB-M64J28-A1上,WSB-M64J30-A4:1992代替WSB-M64J30-A1:1992和WSB-M64L30-C4:1992代替WSB-M64J30-C1
简介：
信息：ICS： CCS：发布：2003-03-31 实施：