水分离性检测标准

原创来源：北检院发布时间：2023-02-26 15:16:33 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

水分离性检测标准相关信息

GB/T 7305-2003 石油和合成液水分离性测定法
简介：1．1 本标准适用于测定石油和合成液的水分离性。本标准适用于测定40。C运动粘度为28．8 mm2／s～90 mm2／s的油品，试验温度为54。C土1℃。也可用于40℃运动粘度超过90 mm2／s的油品，但试验温度为82℃±l℃。对于更高粘度的油品，无法使油和水充分混合，建议用GB／T 8022试验方法。其他试验温度如25℃也可以使用。当测试的合成液相对密度比水大时，试验步骤不变，但应注意这时水可能浮在乳化层或合成液上面。1．2本标准涉及某些有危险性的材料、操作和设备，但是无意对与此有关的所有安全问题都提出建议。因此，用户在使用本标准之前应建立适当的安全和防护措施，并确定有适用性的管理制度。
信息：ICS：75.080 CCS：E30 发布：2003-03-28 实施：2003-09-01

ASTM D1401-21 石油和合成流体水分离性的标准试验方法
简介：
信息：ICS：75.040 CCS：发布：2021-10-01 实施：

ISO 6614-1994/Amd 1-2019 石油产品.石油和合成液体水分离性的测定.修改件1
简介：
信息：ICS：75.080 CCS：发布：2019-12-06 实施：

KS M ISO 6614-2018 石油产品 - 石油和合成液的水分离性测定
简介：
信息：ICS：75.080 CCS：发布：2018-12-24 实施：

ASTM D1401-2012e1 石油和合成液水分离性的标准试验方法
简介： 4.1x00a0;This test method provides a guide for determining the water separation characteristics of oils subject to water contamination and turbulence. It is used for specification of new oils and monitoring of in-service oils. 1.1x00a0;This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. Although developed specifically for steam-turbine oils having viscosities of 28.88201;mm2/s to 908201;mm2/s at 408201;x00b0;C, this test method may be used to test oils of other types having various viscosities and synthetic fluids at other test temperatures. It is recommended, however, that the test temperature be raised to 828201;x00b0;C x00b1; 18201;x00b0;C when testing products more viscous than 908201;mm2/s at 408201;x00b0;C. For higher viscosity oils where there is insufficient mixing of oil and water, Test Method D2711 is recommended. Other test temperatures such as 258201;x00b0;C may also be used. A1% sodium choloride (NaCl) solution or synthetic seawater may be used in place of distilled water when testing certain oils or fuels used in marine applications. 1.2x00a0;When testing synthetic fluids whose relative densities are greater than that of water, the procedure is unchanged, but it should be noted that the water will probably float on the emulsion or liquid. 1.3x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 6.
信息：ICS：75.040 CCS：发布：2012 实施：

ASTM D1401-2012 石油和合成液体的水分离性的标准试验方法
简介：This test method provides a guide for determining the water separation characteristics of oils subject to water contamination and turbulence. It is used for specification of new oils and monitoring of in-service oils.1.1 This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. Although developed specifically for steam-turbine oils having viscosities of 28.8x2013;90 mm2/s at 40x00B0;C, this test method may be used to test oils of other types having various viscosities and synthetic fluids at other test temperatures. It is recommended, however, that the test temperature be raised to 82 x00B1; 1x00B0;C when testing products more viscous than 90 mm2/s at 40x00B0;C. For higher viscosity oils where there is insufficient mixing of oil and water, Test Method D2711 is recommended. Other test temperatures such as 25x00B0;C may also be used. A1% sodium choloride (NaCl) solution or synthetic seawater may be used in place of distilled water when testing certain oils or fuels used in marine applications. 1.2 When testing synthetic fluids whose relative densities are greater than that of water, the procedure is unchanged, but it should be noted that the water will probably float on the emulsion or liquid. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 6.
信息：ICS：75.040;75.120 CCS：E30 发布：2012 实施：

ASTM D1401-2010 石油和合成液体的可水分离性的标准试验方法
简介：This test method provides a guide for determining the water separation characteristics of oils subject to water contamination and turbulence. It is used for specification of new oils and monitoring of in-service oils.1.1 This test method covers measurement of the ability of petroleum oils or synthetic fluids to separate from water. Although developed specifically for steam-turbine oils having viscosities of 28.8x2013;90 mm2/s at 40x00B0;C, this test method may be used to test oils of other types having various viscosities and synthetic fluids at other test temperatures. It is recommended, however, that the test temperature be raised to 82 x00B1; 1x00B0;C when testing products more viscous than 90 mm2/s at 40x00B0;C. For higher viscosity oils where there is insufficient mixing of oil and water, Test Method D2711 is recommended. Other test temperatures such as 25x00B0;C may also be used. A1% sodium choloride (NaCl) solution or synthetic seawater may be used in place of distilled water when testing certain oils or fuels used in marine applications. 1.2 When testing synthetic fluids whose relative densities are greater than that of water, the procedure is unchanged, but it should be noted that the water will probably float on the emulsion or liquid. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 6.
信息：ICS：75.120 CCS：E30 发布：2010 实施：

ASTM D7451-2008a(2013) 轻质和中间馏出的压燃及火花点火燃料水分离性的标准试验方法
简介： 5.1x00a0;The primary use of this test method is to evaluate new additive packages in specific fuels to ensure that fuel-water separability will not be compromised by the use of the additive package, either at their normal treat rates or at several times the intended treat rate to evaluate the impact of potential overtreatment. 5.1.1x00a0;Water Volume Changesx2014;Using this technique reveal the presence of water-soluble components, such as alcohols, in the fuel. 5.1.2x00a0;Interface Condition Ratingsx2014;Using this technique reveal the presence of partially soluble components, such as surfactants, in the fuel. 5.2x00a0;Additives or contaminants that affect the interface could harm water separation properties of fuels in equipment and quickly inhibit the free flow of fuel through filters and injection equipment, causing a decrease in combustion performance. 1.1x00a0;This test method covers the evaluation of the tendency of water and fuels with a final boiling point of less than 390x00b0;C, as measured in Test Method D86, to separate cleanly rather than create emulsions when they may contain potential emulsion forming additives or components, or have been additized with potential emulsion forming additives, or components. 1.2x00a0;This test method applies primarily to gasoline, diesel, kerosine, and distillate grades of gas turbine, marine, home heating oils and furnace fuels (see Specifications D396, D975, D2880, D3699, D4814, and D6985). For fuel components such as biodiesel or alcohol, refer to X1.2 and X1.3. 1.3x00a0;This test method is not meant to certify or qualify fuels for sale, but it is intended for use by additive suppliers to determine the need for demulsifier components in their additive packages. 1.4x00a0;This test method is not meant for testing of fuels containing large amounts of aqueous soluble components, such as E85, or for testing of water emulsified fuels, or for testing of aviation fuels. 1.5x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this ......
信息：ICS：75.160.20 (Liquid fuels) CCS：E31 发布：2008 实施：

CNS 14746-2003 航空燃油水分离性测定法(可携带式微水分离器法)
简介：本标准规定以一种可快速分析的携带式设备，作为现场及实验室使用，以量测航空燃油于通过玻璃纤维凝结体时，释放所包含或乳化之水分的试验法
信息：ICS：75.160.20 CCS：发布：2003-06-24 实施：2003-06-24

NF T60-125-2001 石油产品.矿物油和合成液体水分离性的测定
简介：
信息：ICS：75.080 CCS：E34 发布：2001-02-01 实施：2001-02-05

JIS K2520-2000 石油产品.润滑油.水可分离性的测定
简介：この規格は，石油製品の潤滑油 ()を水又は水蒸気で乳化したときの水分離性を試験する方法について規定する。注 ()合成潤滑油には，抗乳化性試験方法だけが適用される。
信息：ICS：75.100 CCS：E34 发布：2000-11-20 实施：