蓄电池的标称电压检测标准

原创来源:北检院    发布时间:2023-02-28 15:35:41    点击数:

全国服务领域:河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

蓄电池的标称电压检测标准相关信息

BS EN 50342-3-2009 铅酸起动蓄电池组.标称电压36V电池用末端系统
简介:
信息:ICS:29.220.20 CCS:K84 发布:2009-03-31 实施:2009-03-31

BS EN 50342-3-2008 铅酸起动蓄电池组.标称电压36V电池用末端系统
简介:This European Standard is applicable to lead-acid batteries used for starting, lighting and ignition ofpassenger automobiles and light commercial vehicles with a nominal voltage of 36 V. This standard specifiesthe position, details of design and dimensions of a system of battery terminals.Starter batteries with 36 V nominal voltage may have the same dimensions and means for fixation as 6 V or12 V batteries. This can be either intentional or unintentional. Therefore, the compatibility of batteries with36 V nominal voltage down to electric power nets with 6 V or 12 V nominal voltage should be prevented.Such design of a 36 V termination and contacting system must prevent the case to be connected to a 6 V or12 V power net in order to avoid serious damage in the 6 V or 12 V power net. For the same reason thedesign of the battery terminals must prevent that standard commercial jumper-cables may be contacted tothe 36 V battery terminals if the battery is installed in the vehicle or not.A commercial application of this standard must expressively be agreed upon as the final standard may differfrom the present draft.
信息:ICS:29.220.20 CCS:K84 发布:2009-03-31 实施:2009-03-31

NF R13-503-3-2009 铅酸起动蓄电池.第3部分:标称电压为36 V的蓄电池终端系统
简介:
信息:ICS:29.220.20 CCS:K84 发布:2009-01-01 实施:2009-01-10

PN E83001-02-1990 铅酸蓄电池.标称电压6伏的电池尺寸及容量
简介:akumulatora o?owiowego rozruchowego 3-ogniowego z p?ytami typu SE, o pojemno?ci znamionowej 155 A ? h, w obudowie polipropylenowej (P), z monowieczkiem (M):AKUMULATOR ROZRUCHOWY 3SE155 PM PN-90/E-83001/02
信息:ICSCCS发布:1990 实施

PN E83001-03-1987 铅酸蓄电池电池.标称电压12伏电池尺寸和容量
简介:akumulatora kwasowego rozruchowego 6-ogniwowego (6) z p?ytami SE (SE) o pojemno?ci znamionowej 80 A ? h (80) w obudowie z polipropylenu (P): AKUMULATOR ROZRUCHOWY 6SE80P PN-87/E-83001/03
信息:ICSCCS发布:1987 实施

检测流程

1、确认客户委托,寄样。

2、到样之后,确定具体的试验项目以及试验方案。

3、实验室报价。

4、签订保密协议,进行试验。

5、完成试验,确定检测报告

6、后期技术服务

友情提示:暂不接受个人委托测试

以上是关于"蓄电池的标称电压检测标准"的介绍,如有其他问题可以咨询工程师为您服务!

实验室仪器

实验室仪器

蓄电池的标称电压检测标准

© 2024 北检(北京)检测技术研究院 ALL RIGHTS RESERVED