耐燃检测标准

原创来源：北检院发布时间：2023-03-01 19:10:23 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

耐燃检测标准相关信息

GB/T 15903-1995 压敏胶粘带耐燃性试验方法悬挂法
简介： 本标准规定了压敏胶粘带耐燃性试验方法的设备、试样制备、试验步骤和试验结果的等级评定等。本标准适用于在实验室条件下评定压敏胶粘带的耐燃性能。
信息：ICS：83.180 CCS：G38 发布：1995-12-20 实施：1996-08-01

SN/T 2925-2011 软体家具耐点燃性试验方法及评价点火源：阴燃香烟和等同火柴火焰
简介：本标准规定了软体家具用阴燃香烟和等同火柴火焰为点火源的耐点燃性试验方法和评价。本标准适用于软体家具中所使用的面料、衬料和填料。
信息：ICS： CCS：Y81 发布：2011-05-31 实施：2011-12-01

BS 7176-2007+A1-2011 采用测试复合料的非家用座椅用装饰家具的耐燃性规范
简介：This British Standard specifies requirements for the resistance toignition of upholstered furniture used for seating when tested inaccordance with BS 5852, BS EN 1021-1 or BS EN 1021-2, asappropriate. The levels of ignition resistance have been set after carefulconsideration of the fire risk of the particular end-use environmentinvolved. These levels do not necessarily reflect the behaviour of theupholstered seating in a fully developed fire.Upholstered seating for domestic use and transport is not covered bythis standard.NOTE Guidance on the applicability of hazard categories to particularpremises is given in the Notes to Table 1.
信息：ICS：97.140 CCS：Y80 发布：2007-08-31 实施：2007-08-31

ISO 16840-10:2021 轮椅座椅.第10部分:姿势支撑装置的耐燃性.要求和试验方法
简介：
信息：ICS：11.180.10 CCS：发布：2021-06-08 实施：

ASTM D6413-2011a 纺织品耐燃性的标准试验方法(垂直燃烧试验)
简介：This test method determines the response of textiles to a standard ignition source, deriving measurement values for afterflame time, afterglow time, and char length. The vertical flame resistance, as determined by this test method, only relates to a specified flame exposure and application time. This test method maintains the specimen in a static, draft-free, vertical position and does not involve movement except that resulting from the exposure. Test Method D6413 has been adopted from Federal Test Standard No. 191A method 5903.1, which has been used for many years in acceptance testing. The between-laboratory precision of this test method has not been established. Refer to Section 14 for single-laboratory precision. If there are differences or practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples used should be as homogeneous as possible, that are drawn from the material from which the disparate test results are obtained, and that are assigned randomly in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration on the known bias.1.1 This test method is used to measure the vertical flame resistance of textiles. 1.1.1 As a part of the measure of flame resistance, afterflame and afterglow characteristics are evaluated. 1.2 This standard shall be used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled laboratory conditions and shall not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. 1.3 The values stated in either SI units or other units are to be regarded separately. The values stated in each system are not exact equivalents; therefore, each system shall be used independently without combining values. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：59.080.30 (Textile fabrics) CCS：W55 发布：2011 实施：

JCS 4509-2007 耐燃性聚乙烯软质电线
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

DIN EN 50305-2021 轨道交通. 具有特殊耐燃性能的铁路机车电缆. 试验方法
简介：This document specifies special test methods applicable to cables, and their constituent insulating and sheathing materials, for use in railway rolling stock. Such cables are specified in the various parts of EN 50264, EN 50306 and EN 50382.
信息：ICS：29.060.20 CCS：S30 发布：2021-01-00 实施：2021-01-01

DIN EN 50348-2010 耐燃液体涂覆材料的固定静电应用设备.安全性要求;德文版本EN 50348-2010 + Cor.-2010
简介：
信息：ICS：87.100 CCS：J47;K64 发布：2010-08 实施：2010-08-01

JCS 4513-2007 焊接用耐燃性乙烯橡胶铠装电缆
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

DIN 4102-16-2021 建筑材料和构件的耐燃性能. 第16部分: 防火竖井筒检验实施过程
简介：DIN 4102-16 describes the uniform procedure for testing building materials in the \
信息：ICS：13.220.50 CCS：P16 发布：2021-01-00 实施：

SAE AMS 7270L-2010 耐燃65-75密封环丁二烯-丙烯晴(NBR)橡胶
简介：This specification covers a butadiene-acrylonitrile (NBR) rubber in the form of molded rings. These rings have been used typically for at temperatures as low as -67 °F (-55 °C) where resistance to fuel is required, but usage is not limited to such applications. The cross-section of such rings is usually not over 0.275 inch (6.98 mm) in diameter or thickness. Each application, however, should be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2010-05-17 实施：

JCS 4510-2007 耐燃性乙烯橡胶铠装软质电线
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

DIN 4102-7-2018 建筑材料和构件耐燃性能. 第7部分: 屋顶. 要求和检测
简介：DIN 4102-7 contains a method of testing the resistance of roofings/roof coverings against the action of flying sparks and radiating heat, thus concretizing the building regulations of the German federal states.
信息：ICS：13.220.50;91.060.20 CCS：Q10 发布：2018-11-00 实施：

SAE AMS 3330B-2010 耐燃和耐油氟硅酮(FVMQ)橡胶,45-55
简介：This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -60 to +150 °C (-76 to +302 °F). Each application, however, has to be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2010-05-17 实施：

JCS 4512-2007 600V耐燃性聚烯烃铠装软质电缆
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

DIN EN 1102-2016 纺织品.窗帘和帷幕耐燃特性.火焰垂向蔓延试样性能详细测定程序.德文版本EN 1102-2016
简介：
信息：ICS：13.220.40;97.160 CCS：W55 发布：2016-10 实施：

SAE AMS 3331B-2010 耐燃和耐油氟硅酮(FVMQ)橡胶,65-75
简介：This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to +150 °C). Each application, however, has to be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2010-05-17 实施：

JCS 4511-2007 600V耐燃性乙烯橡胶铠装软质电缆
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

ASTM E1353-16 软体家具部件卷烟耐燃性标准试验方法
简介：
信息：ICS：13.220.40 CCS：发布：2016-09-01 实施：

SAE AMS 3376B-2009 非固化密封剂氟硅酮的槽注入温度和耐燃性
简介：This specification covers a permanently mastic fluorosilicone compound in the form of a paste. This product has been used typically for sealing or resealing integral fuel tanks designed for groove-injection type sealing for use from -65 to +360 °F (-54 to +182 °C), but usage is not limited to such applications.
信息：ICS：49.025.40 CCS：V13 发布：2009-10-23 实施：

JCS 4514-2007 焊接用耐燃性交联聚烯烃铠装电缆
简介：
信息：ICS： CCS：K13 发布：2007-04 实施：

GJB 5311A-2015 合成烃耐燃航空液压油规范
简介：本规范规定了合成烃耐燃航空液压油的要求。本规范适用于以合成烃、双酯混合物为基础油，加入多种添加剂调制而成的合成烃耐燃航空液压油。
信息：ICS： CCS：发布：2015-09-24 实施：2015-12-01

SAE AMS 3325E-2009 耐燃料及耐油氟硅(FVMQ)橡胶,55-65
简介：This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 °F (-60 to + 150 °C ); each application, however, has to be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2009-05-28 实施：

JIS R2252-2-2007 耐燃制品的抗磨损性试验方法.第2部分:高温法
简介：この規格は，耐火物製品の熱間における耐摩耗性の評価試験方法について規定する。
信息：ICS：81.080 CCS：Q40 发布：2007-03-20 实施：

DIN 4102-16-2015 建筑材料和构件的耐燃性能.第16部分:防火竖井筒检验实施过程
简介：
信息：ICS：13.220.50;91.060.40 CCS：P16 发布：2015-09 实施：

SAE AMS 3275C-2009 非石棉纤维,耐燃料及耐油丁腈橡胶(NBR)薄板
简介：This specification covers a compressed non-asbestos fiber and acrylonitrile butadiene (NBR) rubber in the form of sheet. This sheet has been used typically for gaskets, sealing between metal surfaces, in contact with fuels or with lubricating oil up to 302 °F (150 °C), but usage is not limited to such applications. Each application should be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2009-05-28 实施：

JIS R2252-1-2007 耐燃制品的抗磨损性试验方法.第1部分:常温法
简介：この規格は，耐火物製品の室温における耐摩耗性の評価試験方法について規定する。
信息：ICS：81.080 CCS：Q40 发布：2007-03-20 实施：

SAE AMS 3325F-2014 耐燃料及耐油氟硅(FVMQ)橡胶,55-65
简介：This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts requiring resistance to jet fuel and lubricating oils, but usage is not limited to such applications. Generally, products are usable over a temperature range of -76 to +302 degrees F (-60 to +150 degrees C); each application, however, has to be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2014-05-28 实施：

ANSI/NFPA 261-2009 已装璜家具材料组件耐香烟闷燃性的测定用试验的标准方法
简介：1.1.1 This test shall apply to upholstered furniture mock-ups. 1.1.2 Mock-up testing is used in assessing the relative resistance to continuing combustion of individual materials used in furniture, such as cover fabrics, filling materials, and welt tape, in realistic combinations and in an ideal geometric arrangement of the seat cushions, back, and arms of furniture items.
信息：ICS：97.140;13.220.40 CCS：Y80;C80 发布：2009 实施：

DIN EN 2881-2007 航空和航天系列.米制系列MOS2润滑的钝化耐腐蚀、耐燃钢沉头双耳密封锁紧浮动地脚螺母.等级:900MPa/120℃
简介：This standard specifies the characteristics of self-locking, fuel resistant, sealing, floating, two lug anchor nuts, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated. Classification: 900 MPa/120 ?,
信息：ICS：49.030.30 CCS：V20 发布：2007-02 实施：

BS EN ISO 9038-2013 液体的耐燃性测定
简介：
信息：ICS：13.220.40;87.040 CCS：C80 发布：2013-08-31 实施：2013-08-31

KS P ISO 7176-16-2008 轮椅.第16部分:软垫部分的耐燃性.要求和试验方法
简介：이 표준은 휠체어에서 천으로 된 부분에 사용되는 재료의 담배 및 성냥에 대한 내화성을 평가
信息：ICS：13.220.40;11.180 CCS：Y14 发布：2008-12-29 实施：2008-12-29

JCS 4507-2007 高压耐燃电缆
简介：
信息：ICS： CCS：K13 发布：2007-02 实施：

DIN EN 2845-2013 航空航天系列.丁腈橡胶(NBR).耐燃和合成抗油性.硬度50 IRHD(国际橡胶硬度).德文和英文版本EN 2845-2013
简介：
信息：ICS：49.025.40 CCS：V13 发布：2013-05 实施：

INTERN TMS-6032-2008 耐燃、油的低压软管
简介：This specification covers the general requirements, labeling/identification, property and performancerequirements, qualification, and source approval and quality control.2.1 Restricted Chemical SubstancesEffective January 1, 2007, all product supplied to the requirements of this specification must complywith the requirements of the CEMS B-50 specification.
信息：ICS： CCS：G33 发布：2008-08-01 实施：

JCS 5423-2007 电视接收机用耐燃性同轴电缆
简介：
信息：ICS： CCS：K13 发布：2007-02 实施：

BS ISO 7176-16-2012 轮椅.姿势支持设备的耐燃性
简介：
信息：ICS：11.180.10;13.220.40 CCS：Y14 发布：2013-04-30 实施：2013-04-30

CNS 11669-2008 耐燃合板
简介：
信息：ICS：79.060.10 CCS：发布：2008-05-07 实施：

JCS 5503-2007 局域网用耐燃性聚烯烃铠装的防护螺旋形双股电缆
简介：
信息：ICS： CCS：K13 发布：2007-02 实施：

ISO 7176-16-2012 轮椅.第16部分:软垫部分的耐燃性
简介：
信息：ICS：11.180.10;13.220.40 CCS：C47 发布：2012-12 实施：

ASTM E1353-08ae1 软体家具部件卷烟耐燃性标准试验方法
简介：
信息：ICS：13.220.40 CCS：发布：2008-04-01 实施：

JCS 4506-2007 低压耐燃电缆
简介：
信息：ICS： CCS：K13 发布：2007-02 实施：

DIN EN 3844-3-2012 航空航天系列.非金属材料可燃性.第3部分:45°小型燃烧试验.材料耐燃性,辉光传播和耐火焰穿透性测定.德文和英文版 EN 3844-3-2011
简介：
信息：ICS：49.025.15 CCS：V13 发布：2012-01 实施：

ASTM E1353-08a 软体家具部件卷烟耐燃性标准试验方法
简介：
信息：ICS：13.220.40 CCS：发布：2008-04-01 实施：

CNS 15048-2007 建筑材料耐燃性试验法－全尺度燃烧试验法
简介：本标准规定建筑材料曝露于单一燃烧火源时，其耐燃性能之试验方法。
信息：ICS：13.220.50 CCS：发布：2007-01-18 实施：2007-01-18

KS K ISO 6941-2011 纺织纤维.耐燃性.垂直定向样品延燃性的测定
简介：이 표준은 단일 또는 다중 구조 형태(코팅, 퀼트, 다층, 샌드위치 조합 및 유사한 조합)
信息：ICS：59.080.30;13.220.40 CCS：W56 发布：2011-12-26 实施：2011-12-26

ASTM E1353-08 软体家具部件卷烟耐燃性标准试验方法
简介：
信息：ICS：13.220.40 CCS：发布：2008-02-15 实施：

TCVN 7444-16-2007 轮椅.第16部分:软垫部分的耐燃性.要求和试验方法
简介：
信息：ICS： CCS：发布：2007 实施：

SAE AS 27198A-2008 槽内铸模的平密封橡胶(-65～+350℉耐燃)
简介：Seal, Plain, Rubber, (-65 to + 350 Degrees F Fuel Resistant), Mold in GrooveTABLE 1 is about NOMINAL TUBE OD REF. etc..
信息：ICS：49.025.40 CCS：V13 发布：2008-02-01 实施：

DIN EN 3475-408-2006 航空航天系列. 航空器用电缆. 试验方法. 第408部分: 耐燃性; 德文版本和英文版本EN 3475-408: 2005
简介：
信息：ICS： CCS：K13 发布：2006-12 实施：

KS K 0583-2011 织物耐燃性试验方法:水平法
简介：이 표준은 천의 방염성을 측정하는 방법에 대하여 규정한다. 이 표준은 방염 가공된 천 및
信息：ICS：59.080.30 CCS：W59 发布：2011-12-26 实施：2011-12-26

BS 7177-2008+A1-2011 垫子,床垫,沙发椅和床托的耐燃性规范
简介：This British Standard specifies requirements for the resistance toignition of mattresses, mattress pads, divans and bed bases when testedin accordance with BS EN 597-1, BS EN 597-2 and BS 6807 includingthose used in areas vulnerable to arson. It does not apply to mattressprotectors. The levels of ignition resistance have been set after carefulconsideration of the fire risk of the particular end-use environmentinvolved. These levels do not necessarily reflect the behaviour of themattress, mattress pad, divan or bed base in a fully developed fire.NOTE Guidance on the applicability of hazard categories to particularpremises is given in the notes to Table 1.
信息：ICS：97.140 CCS：W57;Y80 发布：2008-01-31 实施：2008-01-31

DIN 24320-2006 耐燃液压油.HFAE和HFASHFAE型号液压油.性能和要求
简介：
信息：ICS：75.120 CCS：E39 发布：2006-12 实施：

SAE AMS 3243G-2011 55-65耐燃的氯丁二烯(CR)橡胶
简介：This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically for parts, such as grommets, seals, and line supports, on the firewall of aircraft or wherever flame resistance is of prime importance, but usage is not limited to such applications. Each application should be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2011-09-23 实施：

CNS 4797-1-2007 玩具安全(耐燃性)
简介：本标准规定各类玩具在生产制造中被禁止使用之可燃性材料，及某些玩具在接触小火源时之耐燃性要求。
信息：ICS：97.200.50 CCS：发布：2007-10-24 实施：2007-10-24

DIN EN 1103-2006 纺织品.服装织物.耐燃性能详细测定程序.德文版本 EN 1103-2005
简介：This European Standard specifies a procedure to determine the burning behaviour of textiles for apparel.
信息：ICS：13.220.40;61.020 CCS：W55 发布：2006-03 实施：

SAE AMS 3244H-2011 65-75耐燃氯丁二烯(CR)橡胶
简介：This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a chloroprene (CR) rubber in the form of sheet, strip, tubing, extrusions and molded shapes. These products have been used typically for parts, such as grommets, seals, and line supports, on the firewall of aircraft or wherever flame resistance is of prime importance, but usage is not limited to such applications. Each application should be considered individually.
信息：ICS：49.025.40 CCS：V13 发布：2011-09-23 实施：

BS EN 3475-408-2005 航空器用电缆.试验方法.第408部分:耐燃性
简介：This standard specifies a method of testing the fire resistance of "fire-proof" electrical cables.
信息：ICS：49.060 CCS：V25 发布：2006-02-13 实施：2006-02-13