耐盐雾检测标准

原创来源：北检院发布时间：2023-02-14 22:00:57 点击数：

全国服务领域：河北、山西、黑龙江、吉林、辽宁、江苏、浙江、安徽、福建、江西、山东、河南、湖北、湖南、广东、海南、四川、贵州、云南、陕西、甘肃、青海、台湾、内蒙古、广西、西藏、宁夏、新疆、北京、天津、上海、重庆、香港、澳门

耐盐雾检测标准相关信息

GB/T 9966.15-2021 天然石材试验方法第15部分：耐盐雾老化强度测定
简介：
信息：ICS：91.100.15 CCS：Q21 发布：2021-04-30 00:00:00.0 实施：2021-11-01 00:00:00.0

NF X41-004-2-2013 色漆和清漆 - 耐周期性腐蚀条件的测定 - 第2部分: 湿 (盐雾) /干/潮湿/紫外光
简介：
信息：ICS：87.040 CCS：G50 发布：2013-10-25 实施：2013-10-25

DIN EN ISO 11997-1-2006 色漆和清漆.耐周期性腐蚀条件的测定.第1部分:湿(盐雾)/干/潮湿(ISO 11997-1-2005)
简介：This part of ISO 11997 describes a method for the determnation of the resistance of coatings to one of three defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.
信息：ICS：87.040 CCS：G51 发布：2006-04 实施：

GB/T 31588.1-2015 色漆和清漆耐循环腐蚀环境的测定第1部分:湿(盐雾)/干燥/湿气
简介：GB/T 31588的本部分规定了一种采用指定溶液来测定涂层耐湿（盐雾）/干燥/湿气环境的四种指定循环中的任一循环的试验方法。
信息：ICS：87.040 CCS：G50 发布：2015-06-02 实施：2016-01-01

ISO 11997-2-2013 涂料和清漆.耐周期性腐蚀的测定.第2部分:湿的(盐雾)/干的/湿度/紫外光线的测定
简介：This part of ISO 11997 specifies a test method of determining resistance of coatings to a defined cyde of wet (salt fog)/dry/humidity/UV light conditions using a specified solution.
信息：ICS：87.040 CCS：G51 发布：2013-09-01 实施：

TIS 285.51-2006 色漆,清漆和相关材料的标准试验方法.第51部分:耐盐雾性(雾)
简介：
信息：ICS：87.040 CCS：发布：2006-03-24 实施：

GB/T 1771-2007 色漆和清漆耐中性盐雾性能的测定
简介：本标准规定了测定涂层耐中性盐雾性能的方法。本标准所规定的方法可以作为色漆或涂料体系质量的检测手段。
信息：ICS：87.040 CCS：G50 发布：2007-09-11 实施：2008-04-01

EN ISO 11997-2-2013 涂料和清漆.耐周期性腐蚀条件的测定.第2部分:湿(盐雾),干燥,潮湿,紫外光(ISO 11997-2:2013)
简介：This part of ISO 11997 specifies a test method of determining resistance of coatings to a defined cycle of wet (salt fog)/dry/humidity/UV light conditions using a specified solution.
信息：ICS：87.040 CCS：G51 发布：2013-09 实施：

JIS K5600-7-9-2006 涂料的试验方法.第7部分:耐循环腐蚀条件的测定.第9节:盐雾/干燥/潮湿
简介：この規格は，塩水噴霧・乾燥・湿潤のサイクルに対する塗膜の耐久性を評価する方法について規定する。
信息：ICS：87.040 CCS：G50 发布：2006-02-20 实施：

GB/T 1771-1991 色漆和清漆耐中性盐雾性能的测定
简介： 本标准等效采用国际标准ISO7253-1984《色漆和清漆--耐中性盐雾性能的测定》。本标准规定了测定涂层中耐中性盐雾性能的方法。本标准所规定的方法可以作为色漆或涂料体系质量的检测手段。
信息：ICS：87.040 CCS：G50 发布：1991-08-24 实施：1992-08-01

ISO 11997-2:2013 色漆和清漆——耐循环腐蚀条件的测定Spart 2:湿（盐雾）/干/湿/紫外线
简介：
信息：ICS：87.040 CCS：发布：2013-08-13 实施：

EN ISO 11997-1-2006 色漆和清漆.耐周期性腐蚀的测定.第1部分:湿的(盐雾)/干的/湿度的测定
简介：This part of ISO 11997 describes a method for the determination of the resistance of coatings to one of fourdefined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.
信息：ICS：87.040 CCS：发布：2006-02-01 实施：

GB/T 1765-1979 测定耐湿热,耐盐雾,耐候性(人工加速)的漆膜制备法
简介： 本标准适用于测定耐湿热、耐盐雾、耐候性（人工加速）的漆膜制备。
信息：ICS： CCS：G50 发布：1979-09-15 实施：1980-01-01

KS M ISO 11997-1-2011 涂料和清漆.耐周期性腐蚀的测定.第1部分:湿(盐雾)/干燥/湿度影响试验
简介：이 표준은 규정된 용액을 사용하여 적심(염수 분무)/건조/습도 조건을 갖는 4종의 규정된
信息：ICS：87.040 CCS：G51 发布：2011-12-28 实施：2011-12-28

EN ISO 11997-2-2006 涂料和清漆.耐周期腐蚀状态的测定.第2部分:潮湿(盐雾)/干燥/湿度/紫外光线
简介：This part of ISO 11997 is one of a series of standards dealing with the sampling and testing of paints, varnishes andrelated products.It specifies a test method of determining resistance of coatings to a defined cycle of wet (salt fog)/dry/humidity/UV light conditions using a specified solution.
信息：ICS：87.040 CCS：G51 发布：2006-02-01 实施：

GB 1765-1979 测定耐湿热、耐盐雾、耐侯性 (人工加速) 的漆膜制备法
简介：
信息：ICS： CCS：发布：实施：

BS EN ISO 11997-1-2005 涂料和清漆.耐周期性腐蚀条件的测定.湿(盐雾)/干/潮湿
简介：ISO 11997-1:2005 describes a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.
信息：ICS：87.040 CCS：G50 发布：2005-04-18 实施：2005-04-18

ASTM D2059/D2059M-03(2022) 拉链耐盐雾性的标准试验方法
简介：
信息：ICS：61.040 CCS：发布：2022-03-01 实施：

KS M ISO 11997-1-2011(2016) 色漆和清漆耐循环腐蚀条件的测定第1部分:湿（盐雾）/干/湿
简介：
信息：ICS：87.040 CCS：发布：2011-12-28 实施：

ISO 11997-1:2005 色漆和清漆——耐循环腐蚀条件的测定第1部分:湿（盐雾）/干/湿
简介：
信息：ICS：87.040 CCS：发布：2005-03-21 实施：

KS M ISO 11997-1-2021 色漆和清漆耐循环腐蚀条件的测定第1部分:湿（盐雾）/干/湿
简介：
信息：ICS：87.040 CCS：发布：2021-12-21 实施：

NF T37-001-8-2010 镀层盘材金属.试验方法.第8部分:耐盐雾试验(尘雾)
简介：
信息：ICS：25.220.60 CCS：A29 发布：2010-07-01 实施：2010-07-16

ISO 11997-1-2005 色漆和清漆.耐周期性腐蚀的测定.第1部分:湿(盐雾)/干燥/湿度影响试验
简介：This part of ISO 11997 describes a method for the determination of the resistance of coatings to one of four defined cycles of wet (salt fog)/dry/humidity conditions using specified solutions.
信息：ICS：87.040 CCS：G51 发布：2005-03 实施：

T/CSRA 10.4-2021 芳纶Ⅲ纤维耐老化性能试验方法第4部分：耐盐雾试验方法
简介：T/CSRA10的本部分规定了芳纶Ⅲ纤维耐老化性能的耐盐雾试验方法；T/CSRA10的本部分适用于芳纶Ⅲ纤维。
信息：ICS：59.060.20 CCS：C282 发布：2021-06-30 实施：2021-07-13

DIN EN 13523-8-2010 卷材涂层金属试验方法. 第8部分: 耐盐雾试验; 德文版本EN 13523-8: 2010
简介：
信息：ICS：25.220.60 CCS：A29 发布：2010-07 实施：

NF B10-632-2004 天然石料的测试方法.用盐雾法测定耐老化能力
简介：
信息：ICS：73.020;91.100.15 CCS：D53 发布：2004-06-01 实施：2004-06-20

T/CSRA 15.4-2021 芳纶Ⅲ纤维增强复合材料耐老化性能试验方法第4部分：耐盐雾试验方法
简介：T/CSRA15的本部分规定了芳纶Ⅲ纤维聚合物基复合材料盐雾老化试验的试验设备、试样、试验步骤、计算和试验报告。T/CSRA15的本部分适用于芳纶Ⅲ纤维聚合物基复合材料在无外加应力状态下在盐雾老化条件下对其外观、物理或力学性能的影响。
信息：ICS：59.060.20 CCS：C282 发布：2021-06-30 实施：2021-07-13

BS EN 13523-8-2010 卷材覆层金属.试验方法.耐盐雾试验
简介：This European Standard specifies the procedures for determining the resistance to salt spray (fog) of an organiccoating on a metallic substrate (coil coating).For steel neutral salt spray (fog) is usually used, and for aluminium acetic acid salt spray (fog).
信息：ICS：25.220.60 CCS：A29 发布：2010-06-30 实施：2010-06-30

BS EN 14147-2003 天然石料试验方法.耐盐雾老化性的测定
简介：This European Standard specifies a method to assess the resistance of natural stones to ageing by salt mist.
信息：ICS：73.020;91.100.15 CCS：Q21 发布：2003-11-26 实施：2003-11-26

T/CNCIA 03001-2020 重防腐涂料耐中性盐雾性能的测定
简介：
信息：ICS：87.040 CCS：G51 发布：2020-10-01 实施：2021-12-01

EN 13523-8-2010 卷材涂层金属的试验方法.第8部分:耐盐雾性
简介：This European Standard specifies the procedures for determining the resistance to salt spray (fog) of an organic coating on a metallic substrate (coil coating). For steel neutral salt spray (fog) is usually used, and for aluminium acetic acid salt spray (fog).
信息：ICS：25.220.60 CCS：发布：2010-03-01 实施：

FORD WSS-M2P177-A2-2003 240 H耐盐雾腐蚀的底盘用低可见的油漆性能***与标准FORD WSS-M99P1111-A一起使用***列于标准WSS-M2P177-A1上
简介：
信息：ICS： CCS：发布：2003-08-12 实施：

T/CNCIA 03001-2020 重防腐涂料耐中性盐雾性能的测定
简介：本文件规定了重防腐涂料在中性盐雾试验所用的术语和定义、方法简述、试验材料及试剂、试验溶液、仪器设备、试验条件、试验后试样的处理、试样状态的评定及检验报告等内容。本文件适用于重防腐涂料在中性盐雾中的耐腐蚀性的测定和评价。
信息：ICS：87.040 CCS：C264 发布：2020-10-01 实施：2020-10-26

INTERN CEMS GT-30-2009 耐崩裂性和耐盐雾性
简介：
信息：ICS： CCS：发布：2009-08-01 实施：

ASTM D2059/D2059M-2003(2009) 拉链耐盐雾(雾)能力的标准试验方法
简介：The resistance of a zipper to a variety of saline and non-saline environments can be estimated from the amount and nature of corrosion products and their effect on operability. Results of exposure to the salt spray are merely indicative of the reaction to other corrosive conditions. While the results cannot be related precisely to a given length of exposure in a specific atmosphere, they are useful for measuring relative performance under prescribed conditions for controlling a manufacturing process, and for measuring the effectiveness of protective coatings. Test Method D2059 for the determination of the resistance of zippers to salt spray is considered satisfactory for acceptance testing of commercial shipments of zippers because the test method is used extensively in the trade for acceptance testing. If there are differences of practical significance between reported test results for two laboratories (or more), comparative test should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples should be used that are as homogeneous as possible, that are drawn from the material from which the disparate test results were obtained, and that are randomly assigned in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration of the known bias. The method(s) in the standard along with those in Test Methods D2051, D2052, D2053, D2054, D2057, D2058, D2060, D2061, and D2062 are a collection of proven test methods. They can be used as aids in the evaluation of zippers without the need for a thorough knowledge of zippers. The enumerated test methods do not provide for the evaluation of all zipper properties. Besides those properties measured by means of the enumerated test methods there are other properties that may be important for the satisfactory performance of a zipper. Test methods for measuring those properties have not been published either because no practical methods have yet been developed or because a valid evaluation of the information resulting from existing unpublished methods requires an intimate and thorough knowledge of zippers.1.1 This test method covers the determination of the resistance of all types of zippers to corrosion and their ability to function properly after exposure of specified duration in a prescribed salt spray. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the s......
信息：ICS：61.040 (Headgear. Clothing accessories. Fastening CCS：Y76 发布：2003 实施：

BS EN ISO 11997-1-2017 涂料和清漆.耐周期性腐蚀条件的测定.湿(盐雾)/干/潮湿
简介：
信息：ICS：87.040 CCS：G50 发布：2017-10-17 实施：2017-10-31

KS M ISO 7253-2007 涂料和清漆.耐中性盐雾的测定
简介：
信息：ICS：87.040 CCS：G50 发布：2007-10-31 实施：

ASTM D2059/D2059M-2003(2014) 拉链耐盐雾(雾)能力的标准试验方法
简介： 5.1x00a0;The resistance of a zipper to a variety of saline and non-saline environments can be estimated from the amount and nature of corrosion products and their effect on operability. Results of exposure to the salt spray are merely indicative of the reaction to other corrosive conditions. While the results cannot be related precisely to a given length of exposure in a specific atmosphere, they are useful for measuring relative performance under prescribed conditions for controlling a manufacturing process, and for measuring the effectiveness of protective coatings. 5.2x00a0;Test Method D2059 for the determination of the resistance of zippers to salt spray is considered satisfactory for acceptance testing of commercial shipments of zippers because the test method is used extensively in the trade for acceptance testing. 5.2.1x00a0;If there are differences of practical significance between reported test results for two laboratories (or more), comparative test should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, the test samples should be used that are as homogeneous as possible, that are drawn from the material from which the disparate test results were obtained, and that are randomly assigned in equal numbers to each laboratory for testing. Other materials with established test values may be used for this purpose. The test results from the two laboratories should be compared using a statistical test for unpaired data, at a probability level chosen prior to the testing series. If a bias is found, either its cause must be found and corrected, or future test results must be adjusted in consideration of the known bias. 5.3x00a0;The method(s) in the standard along with those in Test Methods D2051, D2052, D2053, D2054, D2057, D2058, D2060, D2061, and D2062 are a collection of proven test methods. They can be used as aids in the evaluation of zippers without the need for a thorough knowledge of zippers. The enumerated test methods do not provide for the evaluation of all zipper properties. Besides those properties measured by means of the enumerated test methods there are other properties that may be important for the satisfactory performance of a zipper. Test methods for measuring those properties have not been published either because no practical methods have yet been developed or because a valid evaluation of the information resulting from existing unpublished methods requires an intimate and thorough knowledge of zippers. 1.1x00a0;This test method covers the determination of the resistance of all types of zippers to corrosion and their ability to function properly after exposure of specified duration in a prescribed salt spray. 1.2x00a0;The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
信息：ICS：61.040 (Headgear. Clothing accessories. Fastening CCS：Y76 发布：2003 实施：

ISO 11997-1:2017 油漆和清漆 - 耐循环腐蚀条件的测定 - 第1部分:湿（盐雾）/干/湿
简介：
信息：ICS：87.040 CCS：发布：2017-08-11 实施：

KS M ISO 11997-2-2007 涂料和清漆.耐周期性腐蚀的测定.第2部分:湿的(盐雾)/干的/湿度/紫外线光
简介：이 규격은 규정된 용액을 사용하여 적심(염수분무)/건조/습도/자외선으로 정의된 순환 조건에
信息：ICS：87.04 CCS：G51 发布：2007-08-06 实施：2007-08-06

EN 14147-2003 天然石料试验方法.耐盐雾老化性的测定
简介：This European Standard specifies a method to assessThe resistance of natural stones to ageing by salt mist.
信息：ICS：73.020;91.100.15 CCS：发布：2003 实施：

ISO 11997-1-2017 油漆和清漆 - 耐循环腐蚀条件的测定 - 第1部分:湿（盐雾）/干/湿
简介：
信息：ICS：87.040 CCS：发布：2017-08-11 实施：

BS EN 13523-8-2002 卷材覆层金属.试验方法.耐盐雾试验
简介：This Part of EN 13523 defines terms of the procedure for determining the resistance to salt spray (fog) of an organic coating on a metallic substrate.For steel neutral salt spray (fog) is usually used, and for aluminium acetic acid salt spray (fog).
信息：ICS：25.220.60 CCS：A29 发布：2002-08-08 实施：2002-08-08

BS EN 13523-8-2017 卷材覆层金属.试验方法.耐盐雾试验
简介：
信息：ICS： CCS：发布：2017-01-01 实施：2017-01-01

FORD WSS-M2P177-A3-2006 360 H耐盐雾腐蚀的底盘用低可见的油漆性能***与标准FORD WSS-M99P1111-A一起使用***列于标准WSS-M2P177-A1上
简介：
信息：ICS： CCS：发布：2006-09-29 实施：

FORD FLTM BI 103-01-2001 涂漆壁板和部件的耐盐雾腐蚀性;替代FLTM BI 003-01,FLTM EU-BI 003-01
简介：
信息：ICS： CCS：发布：2001-03-13 实施：

KS M ISO 11997-2-2014(2019) 油漆和清漆 - 耐循环腐蚀条件的测定 - 第2部分:湿（盐雾）/干/湿/紫外线
简介：
信息：ICS：87.040 CCS：发布：2014-12-16 实施：

FORD WSS-M2P177-A1-2006 96 H耐盐雾腐蚀的底盘用低可见的油漆性能***与标准FORD WSS-M99P1111-A一起使用***使用WSS-M2P177-B1,B2
简介：
信息：ICS： CCS：发布：2006-09-29 实施：

BS 3900-F19-2000 涂料的试验方法.漆膜的耐久性试验.耐循环腐蚀条件的确定.湿的(盐雾)/干的/湿度/紫外光线的测定
简介：This part of ISO 11997 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a test method of determining resistance of coatings to a defined cycle of wet (salt fog)/dry/humidity/ UV light conditions using a specified solution.
信息：ICS：87.040 CCS：G50 发布：2000-11-15 实施：2000-11-15

ASTM D2059/D2059M-03(2014) 拉链耐盐雾的标准试验方法
简介：
信息：ICS：61.040 CCS：发布：2014-02-01 实施：

FORD WSS-M2P177-A4-2006 480 H耐盐雾腐蚀的底盘用低可见的油漆性能***与标准FORD WSS-M99P1111-A一起使用***列于标准WSS-M2P177-A1上
简介：
信息：ICS： CCS：发布：2006-09-29 实施：

ISO 11997-2:2000 色漆和清漆.耐循环腐蚀条件的测定.第2部分:湿（盐雾）/干/湿/紫外线
简介：
信息：ICS：87.040 CCS：发布：2000-07-20 实施：

BS EN ISO 11997-2-2013 涂料和清漆. 耐循环腐蚀条件的测定. 湿(盐雾)/干/湿度/UV光
简介：
信息：ICS：87.040 CCS：G50 发布：2014-01-31 实施：2014-01-31

FORD WSS-M2P177-A5-2006 每次拉拔的耐盐雾/耐水性能大于480 H的低可见性底盘用油漆的性能***与标准FORD WSS-M99P1111-A一起使用***列于标准WSS-M2P177-A1上
简介：
信息：ICS： CCS：发布：2006-09-29 实施：

ISO 11997-2-2000 色漆和清漆耐周期性腐蚀的测定第2部分:湿的(盐雾)/干的/湿度/紫外光线的测定
简介：This part of ISO 11997 is one of a series of standards dealing with the sampling and testing of paints, varnishes and related products.It specifies a test method of determining resistance of coatings to a defined cycle of wet (salt fog)/dry/humidity/ UV light conditions using a specified solution.
信息：ICS：87.040 CCS：G51 发布：2000-07 实施：

DIN EN ISO 11997-2-2013 涂料和清漆.耐周期性腐蚀条件的测定.第2部分:湿(盐雾)/干燥/潮湿/紫外光(ISO 11997-2-2013).德文版本EN ISO 11997-2-2013
简介：
信息：ICS：87.040 CCS：G50 发布：2013-12 实施：

NF X41-004-1-2006 色漆和清漆.耐周期性腐蚀的测定.第1部分:湿的(盐雾)/干的/湿度
简介：
信息：ICS：87.040 CCS：G51 发布：2006-04-01 实施：2006-04-20

NP ISO 7253-1999 涂料和清漆．耐中性盐雾的测定
简介：A presente Norma faz parte de uma série de normas referentes à colheita de amostras e ensaios de tintas, vernizes e produtos similares. Descreve um método para determinar a resistência dos revestimentos ao nevoeiro salino neutro, conforme as especifica??es do revestimento ou produto.
信息：ICS：87.040 CCS：发布：1999-10-1 实施：